Home > Analytical Products > Analytical Products > Lineup of Standard Samples for Analytical Instruments > Tissue Simulated Liquids for SAR Measurement

Tissue Simulated Liquids for SAR Measurement

Compatibility evaluation for radio wave protection guidelines for mobile phones, etc.

Contact us
Tissue Simulated Liquids for SAR Measurement
This liquid can be used to evaluate and develop the radiation characteristics of phantoms (simulated human bodies) and transmitting/receiving antennas used in the vicinity of the human body for evaluating compliance with radio wave protection guidelines (SAR evaluation) for mobile phones, smartphones, etc. It is suitable for SAR evaluation of mobile phones, smartphones, amateur radio, wireless LAN, Bluetooth, etc.
We offer broadband and narrowband compatible products, so please choose the one that best suits your needs.

 

Broadband Compatible: Tissue Simulated Liquids for SAR Measurement 

This single cable is all you need to evaluate broadband. [Patent No. 6060295]
This eliminates the need to change the fluid for each frequency, improving work efficiency and reducing costs. It also supports simultaneous measurement of multiple frequencies.

Specifications (broadband compatible products)

product BB-0700-6000-H TypeA TypeB
Applicable Frequency 700M ~ 6G [Hz] 700M ~ 1.8G [Hz] 、
2.2G~2.7G [Hz]
3.5G~6G [Hz]
Deviation from standard value*1 Within 10% Within 5% Within 5%
smell Weak
Applicable temperature 19 to 25°C (recommended: 23°C)
Internal capacity 10L
container Made of polyethylene, 290 x 250 x 175 [mm]
Supported standards
IEC 62209 01
IEEE STD 1528
FCC OET BULLETIN 65
ARIB STB T56
Price*2 210,000 yen each (excluding tax)
*1: SPEAG's DAK3.5 is used to evaluate the deviation of the applicable frequency.
*2: Prices and specifications are subject to change without notice.

Narrowband Compatible: Tissue Simulated Liquids for SAR Measurement

It can be used to evaluate the SAR of the head and torso of various wireless terminals, including mobile phones, smartphones, amateur radio, and wireless LAN. [Patent No. 3917151]
We have a lineup of products that support a wide range of frequencies from 733MHz to 5.8GHz. We can also accommodate special orders for the frequency bands listed on the left. Please contact us for details.
The electrical constants that change due to evaporation of water can be easily restored by simply adding deionized water.

lineup

Applicable frequency [MHz]
Head equivalent liquid model number
Body equivalent liquid model number
733
HT0733
-
835
HT0835
BT0835F
900 HT0900 -
915
HT0915
BT0915F
1450
HT1450
-
1624
HT1624
-
1767.5
HT1767
-
1950
HT1950
-
2018
HT2018
-
2600
HT2600
-
2450 HT2450 -
3000 - BT3000F
3500 HT3500 -
5200 HT5200 -

 

Specifications (narrowband compatible products)

product HT (Head Equivalent Fluid)
BT-F (body equivalent fluid)
Deviation from standard value *1
±3%
smell Weak
Applicable temperature *2    19 to 25°C (recommended: 23°C)
Internal capacity 8L
Container Made of polyethylene, 290 x 250 x 175 [mm]
Correspondence standard
IEC 62209 01
IEEE STD 1528
ARIB STB T56
FCC OET BULLETIN 65
Price *3 76,300 yen each (excluding tax)

*1: SPEAG's DAK3.5 is used to evaluate the deviation of the applicable frequency.
*2: Some products are excluded.
*3:
Prices and specifications are subject to change without notice.

Use Cases

  • SAR evaluation of mobile phones (compliant with standards such as IEC 62209-01, IEEE STD 1528, ARIB STD T56, FCC OET BULLETIN 65)
  • Development of transmitting and receiving antennas used near the human body, evaluation of radiation characteristics

Common features (broadband-compatible products, narrowband-compatible products)

  • Since the main ingredient is a surfactant and no organic solvents are used, no organic solvent health examination is required and it can be handled like a household detergent.
    (*However, it may cause rough hands, so please wear protective gear when handling it.)
  • This liquid has little odor and is highly transparent, making it easy to handle.
  • It can be used for measurements at liquid temperatures of 19 to 25°C (recommended: 23°C). (*Excluding some products)
  • The raw materials have the effect of suppressing the growth of bacteria, which can prevent deterioration of the liquid due to mold, etc.
  • Does not affect FRP or acrylic. (*Polypropylene (PP) may harden.)
  • Adjustment of the electrical constants can be done with deionized water. (*After adjustment, it may take about half a day for the electrical constant of the liquid to stabilize. After adjusting the liquid, it is recommended to stir it well and wait about half a day before starting the evaluation.)

inquiry

If you have any questions about this product or would like to request an SDS, please use the button on the right.
Please feel free to contact us if you have any concerns about selecting the right liquid for your compatibility test.
Contact us

Product Line

close up

Service list

close up

List of proposals for problem solving

close up

Catalog list

close up